<i id="jl3tf"><i id="jl3tf"></i></i>

        <noframes id="jl3tf">
        <big id="jl3tf"></big>

        <video id="jl3tf"></video>
        <address id="jl3tf"></address>

        <ol id="jl3tf"></ol>
          <track id="jl3tf"></track>

            <output id="jl3tf"><ol id="jl3tf"></ol></output><b id="jl3tf"></b>

              全國服務熱線:0531-87066186
              常見問題
              您所在的位置:首頁-新聞中心-常見問題-框架斷路器與塑殼斷路器有區別嗎

              框架斷路器與塑殼斷路器有區別嗎

              來源:http://www.cekidots.com/ 日期:2022-03-04 發布人:tongjid

              ABB微型斷路器多作為配電系統的主開關
              ABB miniature circuit breaker is often used as the main switch of distribution system
              框架斷路器一般也被稱作開啟式斷路器或者萬能式斷路器,有手操作,械桿操動,儲能式,非儲能式以及電動式等操作形式。按安裝方式可分為固定式和抽屜式兩種,固定式外殼采用金屬材料,外型尺寸較大,防護等級較低。抽屜式則采用工程塑料外殼,結構較為緊湊,防護等級高,檢修方便。按保護特性分,框架斷路器可分為非選擇性(A類)和選擇性(B類),B類斷路器多采用電子式過電流脫扣器,具有長延時,短延時和瞬時動作保護三段保護特性。智能型框架斷路器內置單片機,具有顯示,報警,自檢和通信功能。
              Frame circuit breaker is also generally called open circuit breaker or universal circuit breaker. It has manual operation, mechanical rod operation, energy storage type, non energy storage type and electric type. According to the installation mode, it can be divided into fixed type and drawer type. The fixed shell is made of metal material, with large external size and low protection grade. The drawer type adopts engineering plastic shell, which has compact structure, high protection level and convenient maintenance. According to the protection characteristics, the frame circuit breaker can be divided into non selective (Class A) and selective (class B). Class B circuit breaker mostly adopts electronic overcurrent release, which has three protection characteristics of long time delay, short time delay and instantaneous action protection. The intelligent frame circuit breaker has built-in single chip microcomputer and has the functions of display, alarm, self inspection and communication.
              可與工控機組成監控系統,框架斷路器的最大特點是容量大,極限分段能力高和足夠的短時耐受電流,如DW17型斷路器的額定電流高達5000A,額定短時耐受電流高達100KA,這使得框架斷路器有很好的選擇性和穩定性。
              It can form a monitoring system with industrial computer. The biggest characteristics of frame circuit breaker are large capacity, high limit segmentation capacity and sufficient short-time withstand current. For example, the rated current of dw17 circuit breaker is up to 5000A and the rated short-time withstand current is up to 100kA, which makes the frame circuit breaker have good selectivity and stability.
              正是由于這些優秀的特點,使得框架斷路器的價格較高,多用于低壓配電系統的主開關,以及重要的,負載較大的主干線和大型電動機的保護。
              It is precisely because of these excellent characteristics that the price of frame circuit breaker is high. It is mostly used for the main switch of low-voltage distribution system, as well as the protection of important trunk lines and large motors with large load.
              塑殼斷路器也被成為裝置式斷路器,所有的零件都密封于外殼中,輔助觸點,欠電壓脫扣器以及分勵脫扣器等多采用模塊化。由于結構非常緊湊,塑殼斷路器基本無法檢修。其多采用手動操作,大容量可選擇電動分合。由于電子式過電流脫扣器的應用,塑殼斷路器也可分為A類和B類兩種,B類具有良好的三段保護特性,但由于價格因素,采用電磁式脫扣器的A類產品的市場占有率更高。
              Molded case circuit breaker is also called device circuit breaker. All parts are sealed in the shell. Auxiliary contacts, undervoltage release and shunt release are mostly modular. Due to the very compact structure, the molded case circuit breaker can hardly be overhauled. Most of them adopt manual operation, and electric opening and closing can be selected for large capacity. Due to the application of electronic over-current release, molded case circuit breaker can also be divided into class A and class B. class B has good three-stage protection characteristics, but due to price factors, class a products using electromagnetic release have a higher market share.
              塑殼斷路器的特點是體積小,接觸防護好,安裝適用方便且價格便宜。但與框架斷路器相比,其容量小,短路分段能力低,選擇性和耐受能路差,智能化方面也略顯不足。雖然近年來,新型的塑殼斷路器容量已經做到了很高,但由于結構上的不足,短時耐受能力依然無法得到大幅改善,選擇塑殼斷路器時必須注意這個問題。
              Molded case circuit breaker is characterized by small volume, good contact protection, convenient installation and low price. However, compared with frame circuit breaker, it has small capacity, low short-circuit segmentation capacity, poor selectivity and withstand energy, and slightly insufficient intelligence. Although the capacity of the new molded case circuit breaker has been very high in recent years, due to the lack of structure, the short-term withstand capacity can not be greatly improved. We must pay attention to this problem when selecting the molded case circuit breaker.
              以上就是三位工程師的對兩類斷路器的看法,我也稍微說下自己的看法,當然和工程師相比還是有很大差距的。我覺得無論是選擇框架斷路器,還是塑殼斷路器,主要是要結合自身的情況,比方說要操作檢修方便,分段能力高,那顯然框架斷路器更合適。而如果是用于額定電流比較低,同時希望預算比較低時,塑殼斷路器則顯得更加合適!
              The above is the views of the three engineers on the two types of circuit breakers. I will also say my own views a little. Of course, there is still a big gap compared with the engineers. I think whether frame circuit breaker or molded case circuit breaker is selected, it is mainly based on its own situation. For example, it is necessary to have convenient operation and maintenance and high sectioning capacity. Obviously, frame circuit breaker is more suitable. If it is used for low rated current and low budget, the molded case circuit breaker is more suitable!


              地址:濟南市槐蔭區經四緯十二盧浮商務中心D2-909   電話:0531-87066186
              網站:http://www.cekidots.com/   備案號:魯ICP備2021012001號-1  技術支持:網站建設·推廣運營

              魯公網安備 37010402001012號

              么公吃我奶水边吃饭边做_办公室美妇疯狂叫声浪吟_又大又粗又硬进去就是爽_国产美女亚洲精品久久久96