<i id="jl3tf"><i id="jl3tf"></i></i>

        <noframes id="jl3tf">
        <big id="jl3tf"></big>

        <video id="jl3tf"></video>
        <address id="jl3tf"></address>

        <ol id="jl3tf"></ol>
          <track id="jl3tf"></track>

            <output id="jl3tf"><ol id="jl3tf"></ol></output><b id="jl3tf"></b>

              全國服務熱線:0531-87066186
              常見問題
              您所在的位置:首頁-新聞中心-常見問題-接觸器線圈接線為什么有時要接火線跟零線,而有時都要接

              接觸器線圈接線為什么有時要接火線跟零線,而有時都要接

              來源:http://www.cekidots.com/ 日期:2021-05-14 發布人:tongjid

              這是因為交流接觸器的吸合線圈的工作額定電壓,要求不同。我國低壓供電方式大都為三相四線制,(三根火線稱相線L1L2L3,零線N與任一相線的電壓為220V,俗稱相電壓。相線與相線之間的稱為線電壓,均為380V)。
              This is because the rated voltage of the pull-in coil of AC contactor is different. China's low-voltage power supply mode is mostly three-phase four wire system (three live wires are called phase line l1l2l3, and the voltage between zero line N and any phase line is 220 V, commonly known as phase voltage). The voltage between phase lines is called line voltage (380V).
              現在交流接觸器的型號都根據GB14048.4和IEC60947-4-1標準,重新劃分了。將交流接觸器AC系列分為以下幾類。
              Now the models of AC contactors are re classified according to the standards of gb14048.4 and iec60947-4-1. AC contactor AC series are divided into the following categories.
              ①AC-1類接觸器是用來控制無感或微感電路的.
              ① Ac-1 contactor is used to control non inductive or micro inductive circuit
              ②AC-2類接觸器是用來控制繞線式異步電動機的啟動和分斷的.
              ② AC - 2 contactor is used to control the starting and breaking of wound induction motor
              ABB接觸器代理
              ③AC-3和AC-4接觸器可用于頻繁控制異步電動機的啟動和分斷。常用的交流接觸器CJ10、CJ40、CJ12、CJ20和CDC1、CDC3-9~110Ⅴ、CJX1.、CDX1.、CDX2、CDC7系列等等。
              ③ AC-3 and AC-4 contactors can be used to frequently control the starting and breaking of asynchronous motors. Commonly used AC contactors CJ10, CJ40, cj12, cj20 and cdc1, cdc3-9 ~ 110 V, cjx1., Cdx1., CDX2, cdc7 series, etc.
              常用的有交流(AC)24V、36V、110V、220Ⅴ、380V。它是根據接觸器的工作環境和工作條件來生產的。
              Commonly used are AC 24 V, 36 V, 110 V, 220 V, 380 v. It is produced according to the working environment and conditions of the contactor.
              它只是接觸器吸合線圈(A1、A2)的電壓值不同,其工作原理完全一樣。
              It is just that the voltage value of the contactor pull-in coil (A1, A2) is different, and its working principle is exactly the same.
              常用的交流接觸器線圈的端子標號用A1.、A2標注。如上圖所示,它為一只線圈為380V工作電壓的交流接觸器,按圖中,將A2與三相交流電連接,A1端子與啟動按鈕的常開。
              The terminal mark of common AC contactor coil is marked with A1. And A2. As shown in the figure above, it is an AC contactor with a coil of 380V working voltage. According to the figure, A2 is connected with three-phase AC, and terminal A1 is normally open with the start button.
              2連接,利用接觸器的主觸頭來完成自鎖功能(實際工作電路中是利用交流接觸器的一對常開輔助觸頭)。這里只簡化說接觸器的工作原理而為之。
              The main contact of the contactor is used to complete the self-locking function (in the actual working circuit, a pair of normally open auxiliary contacts of the AC contactor are used). Here, the working principle of contactor is simplified.
              當按下啟動按鈕,電流從按鈕的1常開點流向2→到停止按鈕2→按鈕的常閉→3,此時交流接觸器得電吸合。完成一個啟動的閉合回路。一斷吸合,馬上可以放開啟動按鈕,自鎖由交流接觸器的主觸頭完成任務。
              When the start button is pressed, the current flows from the normally open point of the button 1 to the normally closed point of the button 2 → to the stop button 2 → to the normally closed point of the button 3. At this time, the AC contactor is powered on. Complete a start-up closed loop. As soon as the switch is closed, the start button can be released immediately, and the self-locking task is completed by the main contact of AC contactor.
              停機時只需要按一下停止按鈕(2~3),它由原來的常閉變為常開,這時交流接觸器線圈失電釋放主觸頭,由制造時的壓簧將E型硅鋼鐵頂起,電動機停止旋轉。
              When the machine stops, it only needs to press the stop button (2 ~ 3), which changes from the original normally closed to normally open. At this time, the coil of AC contactor loses power and releases the main contact. The E-type silicon steel is jacked up by the pressure spring during manufacturing, and the motor stops rotating.


              地址:濟南市槐蔭區經四緯十二盧浮商務中心D2-909   電話:0531-87066186
              網站:http://www.cekidots.com/   備案號:魯ICP備2021012001號-1  技術支持:網站建設·推廣運營

              魯公網安備 37010402001012號

              么公吃我奶水边吃饭边做_办公室美妇疯狂叫声浪吟_又大又粗又硬进去就是爽_国产美女亚洲精品久久久96